APP Connection

a.     Preparation

Make sure that the mobile device, robot, and home Wi-Fi are ready.

Please note that the robot only supports connection to 2.4 GHz Wi-Fi, and does not support 5GHz or enterprise networks.

b.     Download Smart Life App

Method I

Scan the QR code, then follow the instructions to download and install the app.

Method II 

Search "Smart Life" in the App store, download and install the app.

c.     Turn on the robot power

d.     Activate the robot's Wi-Fi

Press the HOME and START button together for 3 second and then release. Make sure you've heard a beep sound. After activating the robot's Wi-Fi, the Wi-Fi indicator light starts blinking.

e.     Connect the robot to home Wi-Fi

Meanwhile, the network information and password will be sent to the robot. The robot will try to connect to the home Wi-Fi.

More Tips：

1. Make sure the connected home Wi-Fi network is a 2.4G or 2.4/5G mixed network.
2. Before configuring the network, ensure that the robot is fully charged. If not, place the robot on the Charging Dock for charging. You may configure the network while charging the robot.
3.The Wi-Fi indicator light under the robot cover (on the upper right of the robot power switch) is blinking.
4. Make sure that the power switch is turned on and startup of the robot is complete (there will be a startup signal during startup, which takes about 20s) before configuring.
5. Before or during the network setup, make sure to press the network setup button (press HOME and START button together and is a small dot and should be pressed for 3 second). You will hear a voice prompt.